Heat Registers of metal or wood

Hunting for heat registers (click here to view)? Metal register or wood vent take your fancy? heat registers are sure to brighten things up around your abode - our registers are works of art! heat registers, whether a wood vent, brass vents or other metal register we have heat registers that will perk up your room immeasurably. Wood heat registers range from our affordable value line to the premium single-block-of-wood heat vent with recessed thumbwheel that your vacuum cleaner will glide right over. From the tasteful mission style metal register to more ornate victorian style brass vents these heat registers and wood, black, nickel, copper and brass vents are well worth viewing. We have some great closeup pictures of a metal register and wood vent, that will probably answer any question you might have about design and function.

Metal heat registers are made made of very thick plated steel with two millimeter thick faceplates, or solid bras three millimeters thick. These are very sturdy and they can take the heat!

heat registers in standard woods include in red oak, white oak, ash, maple, birch, hickory, southern yellow pine, white pine, or birch. In addition we offer heat registers in exotic woods such as walnut, cherry, genuine mahogany, quartersawn red or white oak, red birch, bamboo, and teak at a reasonable additional charge.

heat registers can also be custom made. Typically this necessary for cold air returns. We feature the classic "egg crate" style cold air return that wood vents from 100 years ago often featured. We often find people that have had their contractor accidentally cut odd sized holes in their floor. Don't panic! It may be a predicament, but we can certainly fix the problem with custom size wood vents. 

Also, you'll want to check out our custom stainless steel, copper, and brass cold air returns in honeycomb, basket weave, mission or teardrop style. They can be made in custom sizes, as well as our wooden geometric heat registers. 

You might very well expect quality units such as these to be very expensive, but we think you'll be pleasantly surprised at the affordability, especially given the high style they exhibit. Typically they ship out within three business days, so the wait time is certainly very short assuming that the delivery company gets them to you in a timely manner. Click on the link and take a look at what we have. You'll be glad you did!

When you want to obtain heat registers, irregardless of whether they are metal if they are wood, it is very important to measure the size of the duct opening more than once. Measurements refer to the duct opening size. For example, if you get a 4 by 10 vent that means that the duct opening is 4 by 10 approximately, although the overall dimensions will be somewhat larger, probably they will be closer to five and one quarter by eleven and one quarter inches.

Most heat registers are designed to go into a floor location, in which case it will be held in place via gravity. If you are planning to mount in a wall or ceiling then in the case of a wood vent you will need to drill through the face of the unit and attached it with screws. Six inch wide units come with color matched screws for wall and ceiling mounting, but four inch wide do not.